Jeep Liberty: Air Conditioning Control - Manual Heating And Air Conditioning - Climate Controls - Understanding Your Instrument Panel - Jeep Liberty Owner's ManualJeep Liberty: Air Conditioning Control

Press this button to engage the Air

Press this button to engage the Air Conditioning. A light will illuminate when the Air Conditioning system is engaged. Rotating the dial left into the blue area of the scale indicates cooler temperatures, while rotating right into the red area indicates warmer temperatures.

NOTE: The air conditioning compressor will not engage until the engine has been running for about 10 seconds.

• MAX A/C

For maximum cooling use the A/C and recirculation buttons at the same time.

• ECONOMY MODE

If economy mode is desired, press the A/C button to turn OFF the indicator light and the A/C compressor. Then, move the temperature control to the desired temperature.

    Mode Control (Air Direction)
    Rotate this control to choose from several patterns of air distribution. You can select either a primary mode as identified by the symbols on the control, or a blend of two of these modes. ...

    See also:

    Before You Begin Programming HomeLink
    Be sure that your vehicle is parked outside of the garage before you begin programming. For more efficient programming and accurate transmission of the radio-frequency signal it is recommended th ...

    Checking the tyre pressure after a repair
    When driving the vehicle, if you experience vibrations, abnormal steering, or noises, reduce speed immediately. Drive with extreme caution and reduced speed to the first safe place to stop the ...

    Engine coolant temperature gauge
    The gauge A indicates the engine coolant temperature. The engine coolant temperature is within the normal range when the gauge is within the zone B shown in the illustration. The engine cool ...