Jeep Liberty: Brake Assist System (BAS)
The BAS is designed to optimize the vehicleвЂ™s braking capability during emergency braking maneuvers. The system detects an emergency braking situation by sensing the rate and amount of brake application and then applies optimum pressure to the brakes. This can help reduce braking distances. The BAS complements the anti-lock brake system (ABS). Applying the brakes very quickly results in the best BAS assistance. To receive the benefit of the system, you must apply continuous braking pressure during the stopping sequence, (do not вЂњpumpвЂќ the brakes). Do not reduce brake pedal pressure unless braking is no longer desired. Once the brake pedal is released, the BAS is deactivated.
The Brake Assist System (BAS) cannot prevent the natural laws of physics from acting on the vehicle, nor can it increase the traction afforded by prevailing road conditions. BAS cannot prevent collisions, including those resulting from excessive speed in turns, driving on very slippery surfaces, or hydroplaning.
The capabilities of a BAS-equipped vehicle must never be exploited in a reckless or dangerous manner, which could jeopardize the userвЂ™s safety or the safety of others.
1 Switch for selecting channel A (CH.A) or channel B (CH.B) 2 On/Off button 3 Volume 4 On/Off indicator light Two sets of cordless headphones are included with the RSE system. The cordless he ...
Daytime running light system (if equipped)
The brightness of the illumination of the high beam headlights is reduced by the daytime running light system. The light switch must always be turned to the вЂњвЂќ position when it is ...
To shift from any position, press firmly on the brake pedal and the release button on the side of the shift lever. You cannot shift out of Park when the ignition switch is in the LOCK (0) ...