GMC Terrain: Checking Coolant - Engine Coolant - Vehicle Checks - Vehicle Care - GMC Terrain Owner's ManualGMC Terrain: Checking Coolant

The vehicle must be on a level surface when checking the coolant level.

Check to see if coolant is visible in the coolant surge tank. If the coolant inside the coolant surge tank is boiling, do not do anything else until it cools down. If coolant is visible but the coolant level is not at or above the COLD FILL line, add a 50/50 mixture of clean, drinkable water and DEX-COOL coolant at the coolant surge tank, but be sure the cooling system is cool before this is done. See Cooling System on page 10‑15 for more information.

The coolant surge tank is located in the engine compartment on the driver side of the vehicle. See Engine Compartment Overview on page 10‑6 for more information on location.

    What to Use
    WARNING Adding only plain water or some other liquid to the cooling system can be dangerous. Plain water and other liquids, can boil before the proper coolant mixture will. The coolant warning sy ...

    How to Add Coolant to the Coolant Surge Tank
    Notice: This vehicle has a specific coolant fill procedure. Failure to follow this procedure could cause the engine to overheat and be severely damaged. If you have not found a problem yet, check t ...

    See also:

    Menu overview
    The number of menus shown depends on the optional equipment in the vehicle. The Audio and Tel menus differ slightly in vehicles with an audio system and vehicles with COMAND. The examples given ...

    Vehicle load capacity
    Do not exceed the load limit of your vehicle shown as “The combined weight of occupants and cargo” on the Tire and Loading Information label. Do not exceed the number of occupants shown ...

    Hood
    Release the lock from the inside of the vehicle to open the hood. Pull the hood release lever. The hood will pop up slightly. Lift the auxiliary catch lever and lift the hood. Hold the hood ...