Ford Escape: Clear MyKey - MyKey - Locks and Security - Ford Escape Owner's ManualFord Escape: Clear MyKey

To reset all MyKeys as admin keys do the following:

1. Turn the vehicle on using the admin key.
2. Press SETUP until PRESS RESET TO CLEAR MYKEY is displayed.
3. Press and release the RESET button. HOLD RESET TO CONFIRM CLEAR is displayed.
4. Press and hold the RESET button for two seconds until ALL MYKEYS CLEARED is displayed.

    Programming MyKey Optional Settings
    Turn the ignition on using an admin key. To program the optional settings, use the message center buttons to do the following: 1. Press SETUP until RESET FOR MYKEY SETTINGS is displayed. 2. Press ...

    Check MyKey System Status
    The vehicle’s message center system check will provide the status of the following MyKey parameters: • MYKEY MILES — This odometer only tracks mileage when a MyKey is used. If mileage does ...

    See also:

    Important Maintenance Precautions
    If you have the required service done but do not reset the display, or reset the display without doing the service, the system will not show the correct maintenance intervals. This can lead ...

    Checking bulbs
    With all doors closed, apply the parking brake and turn the ignition switch to the ON position without starting the engine. The following lights will come on: The following lights come on bri ...

    Towing Your Vehicle Behind a Motorhome
    Your vehicle can be towed behind a motorhome at legal highway speeds up to 65 mph (100 km/h). Do not exceed 65 mph (100 km/h). Otherwise, severe transmission damage will occur. To avoid damag ...