Jeep Liberty: Draining Fluid - Transfer Case - Maintenance Procedures - Maintaining Your Vehicle - Jeep Liberty Owner's ManualJeep Liberty: Draining Fluid

First remove the fill plug (1), then the drain plug (2).

Recommended tightening torque for the drain and fill plugs is 15–25 ft lbs (20–34 N·m).

CAUTION!
Do not over-tighten the plugs. You could damage them and cause a leak.

    Adding Fluid
    Fluid should be added only to fill hole until fluid begins to run out of the hole. ...

    Lubricant Selection
    Use only manufacturer’s recommended fluid. Refer to “Fluids, Lubricants, and Genuine Parts” in “Maintaining Your Vehicle” for further information. ...

    See also:

    Steering Wheel Controls
    Some audio steering wheel controls can be adjusted at the steering wheel. : Press to interact with the available Bluetooth or OnStar systems. : Press to silence the vehicle speakers only. Pre ...

    Locking with key
    Locking with key The power door lock system allows you to lock or unlock all doors simultaneously. - Turning the driver’s door key cylinder to the front of the vehicle 1 will lock all doors ...

    Manual seats
    Manual seats Do not adjust the seat while the vehicle is moving. Doing so could cause loss of vehicle control and personal injury. 1. Forward and back adjustment. 2. Height adjustment. 3. ...