Jeep Liberty: Driver Memory Seat вЂ” If Equipped
This feature allows the driver to store up to two different memory profiles, for easy recall through a memory switch. Each memory profile contains desired position settings for the driver seat and side mirrors and a set of desired radio station presets.
The memory switch is located on the instrument panel to the left of the steering column. The switch contains a S (SET) button to activate the memory save function. It also contains a rocker switch labeled with the number (1) and the number (2). The rocker switch allows the driver to recall either of the two pre-programmed memory profiles by pressing the appropriate side of the switch.
Driver Memory Switch
- Programming The Memory Feature
- Linking And Unlinking The Remote Keyless Entry Transmitter To Memory
- Memory Position Recall
- Easy Entry/Exit Seat (Available With Memory Seat Only)
Low battery voltage
If the battery voltage is too low, the parking brake cannot be applied or released. Connect an auxiliary battery if the battery voltage is too low, see page 114. ...
Using the SmartKey
The SmartKey must be close to the driver's door handle. Point the tip of the SmartKey at the driver's door handle. Press and hold the button until the side windows and the panoram ...
How does the airbag supplemental restraint system work?
The airbag SRS is designed to activate when the vehicle sustains a longitudinal deceleration sufficient to cause the airbag sensors to close an electrical circuit that initiates airbag inflation. ...