GMC Terrain: Driving in Water - Off-Road Driving - Driving Information - Driving and Operating - GMC Terrain Owner's ManualGMC Terrain: Driving in Water

WARNING

Driving through rushing water can be dangerous. Deep water can sweep your vehicle downstream and you and your passengers could drown. If it is only shallow water, it can still wash away the ground from under your tires. Traction could be lost, and the vehicle could roll over. Do not drive through rushing water.

Notice: Do not drive through standing water if it is deep enough to cover the wheel hubs, axles or exhaust pipe. Deep water can damage the axle and other vehicle parts.

If the standing water is not too deep, drive slowly through it. At faster speeds, water splashes on the ignition system and the vehicle can stall. Stalling can also occur if you get the exhaust pipe under water.

While the exhaust pipe is under water, you will not be able to start the engine. When going through water, the brakes get wet, and it might take longer to stop. See Driving on Wet Roads on page 9‑11.

    Driving in Mud, Sand, Snow, or Ice
    Use a low gear when driving in mud – the deeper the mud, the lower the gear. Keep the vehicle moving to avoid getting stuck. Traction changes when driving on sand. On loose sand, such as on beach ...

    After Off-Road Driving
    Remove any brush or debris that has collected on the underbody or chassis, or under the hood. These accumulations can be a fire hazard. After operation in mud or sand, have the brake linings clean ...

    See also:

    Turn signal switch
    1 Turn signal Move the lever up or down to signal the turning direction. When the turn is completed, the turn signals cancel automatically. 2 Lane change signal To indicate a lane change, mov ...

    Drive Belt
    WARNING: When the engine is running, keep hands, hair, clothing, tools, etc. away from the moving fan and drive belts. Make sure the drive belt tension is correct. If the belt is too loose, insuff ...

    System
    - Button feedback: Soft key confirmation tone on or off. - Clock adjust: Select 12 or 24 hour clock. Set current time. Select Date to change the date, or to alter the date format. Select Set, to ...