Range Rover Evoque: Easy entry/exit
When Easy entry/exit is configured, the driverвЂ™s
seat will automatically lower when the ignition
is switched off and the door release lever is
used. Upon returning to the vehicle, when the
driverвЂ™s door is closed and the seat belt is
fastened, the seat will return to itвЂ™s previously
Note: Some vehicle specifications require the
ignition to be turned on.
See 56, VEHICLE INFORMATION AND
Adjust the head restraint so
top of the head restraint is above the
centre line of the head. An incorrectly
adjusted head restraint increases the
risk of death or serious injury in the
Models with вЂsportsвЂ™ seats have non adjustable
and non removable head restraints.
The front seats tilt and power slide forwards for
entry to and exit from the rear seats. Operation
is controlled by a lever and switch.
1. Lift the locking lever and pivot the seatback
Make sure that the vehicle is stable before commencing work.
the drive shaft(s) are to be removed, release the parking brake and select
NEUTRAL 'N' in the
transmission in order that the shaft(s) can be rotated when the vehicle is
raised to the desired height.
Removal steps in this procedure may contain installation details.
Vehicles with glass roof panel shown, vehicles without glass roof panel similar.
1. Refer to: Windshield Glass (501-11 Glass, Frames and Mechanisms,
Removal and Installation).
2. NOTE: The procedure
В© 2011-2020 Copyright www.rrevoque.org