Jeep Liberty: Electronic Roll Mitigation (ERM)
This system anticipates the potential for wheel lift by monitoring the driverвЂ™s steering wheel input and the speed of the vehicle. When ERM determines that the rate of change of the steering wheel angle and vehicleвЂ™s speed are sufficient to potentially cause wheel lift, it then applies the appropriate brake and may also reduce engine power to lessen the chance that wheel lift will occur. ERM will only intervene during very severe or evasive driving maneuvers. ERM can only reduce the chance of wheel lift occurring during severe or evasive driving maneuvers. It cannot prevent wheel lift due to other factors, such as road conditions, leaving the roadway, or striking objects or other vehicles.
NOTE: ERM is disabled anytime the ESC is in вЂњFull OffвЂќ mode. Refer to Electronic Stability Control (ESC) for a complete explanation of the available ESC modes.
Many factors, such as vehicle loading, road conditions, and driving conditions, influence the chance that wheel lift or rollover may occur. Electronic Roll Mitigation (ERM) cannot prevent all wheel lift or rollovers, especially those that involve leaving the roadway or striking objects or other vehicles. The capabilities of an ERM-equipped vehicle must never be exploited in a reckless or dangerous manner, which could jeopardize the userвЂ™s safety or the safety of others.
If a fault with one of the radar sensors is detected, an amber warning indicator dot is displayed in the exterior mirror and the message BSM not available is displayed in the message centre. Note ...
When the audio system volume is turned off completely, the player will pause and will resume playing when the volume is turned up again. ...
Engine Drag Control (EDC)
EDC helps keep the engine running if the wheels show a tendency to lock, e.g., when shifting down in the Geartronic manual shifting mode or while using the engine's braking function on a slipp ...