Jeep Liberty: Enabling And Disabling Parksense
ParkSense can be enabled and disabled with a switch located in the switch bank of the instrument panel or through the Customer-Programmable Features section of the EVIC. The available choices are: OFF, Sound Only, or Sound and Display. Refer to вЂњElectronic Vehicle Information Center (EVIC)/Personal Settings (Customer- Programmable Features)вЂќ in вЂњUnderstanding Your Instrument PanelвЂќ for further information.
When the ParkSense switch is pressed to disable the system, the instrument cluster will display the вЂњPARK ASSIST OFFвЂќ message for approximately five seconds. Refer to вЂњElectronic Vehicle Information Center (EVIC)вЂќ in вЂњUnderstanding Your Instrument PanelвЂќ for further information. When the shift lever is moved to REVERSE and the system is disabled, the EVIC will display the вЂњPARK ASSIST OFFвЂќ message for as long as the vehicle is in REVERSE.
The ParkSense switch LED will be ON when Park- Sense is disabled or defective. The ParkSense switch LED will be OFF when the system is enabled.
Turn signal control
вЂў Push down to activate the left turn signal. вЂў Push up to activate the right turn signal. ...
Tyres and wheels
*Optional equipment. ...
Map light 1) Map light switch (lens) To turn on the map light, push the lens. To turn it off, push the lens again. When leaving the vehicle, make sure the lights are turned off to avoid batt ...