Jeep Liberty: Energy Management Feature
This vehicle has a safety belt system with an energy management feature in the front seating positions to help further reduce the risk of injury in the event of a head-on accident.
This safety belt system has a retractor assembly that is designed to release webbing in a controlled manner. This feature is designed to help reduce the belt force acting on the occupantвЂ™s chest.
вЂў The belt and retractor assembly must be replaced if the seat belt assembly вЂњAutomatic Locking Retractor (ALR)вЂќ feature or any other seat belt function is not working properly when checked according to the procedures in the Service Manual.
вЂў Failure to replace the belt and retractor assembly could increase the risk of injury in accidents.
To Use The Engine Coolant Heater
1. Turn off the engine. 2. Open the hood and unwrap the electrical cord. The electrical cord is located on the passenger side of the engine compartment, in front of the air cleaner. 3. Plug it in ...
Illuminated ignition switch (if equipped) Whenever a door is opened, the ignition switch will be illuminated for your convenience, provided the ignition switch is not in the ON position. The lig ...
Recovering a vehicle that has become stuck
Pull away smoothly, slowly, and in a straight line when pulling out a vehicle that has become stuck. Excessive tractive power could damage the vehicles. If the drive wheels have become stuck in ...