Dodge Nitro: Engine block heater - Starting and operating - Dodge Nitro Owner's ManualDodge Nitro: Engine block heater

The engine block heater warms the engine, and permits quicker starts in cold weather. Connect the cord to a standard 110-115 Volt AC electrical outlet with a grounded three-wire extension cord.
• The engine block heater cord is found under the hood clipped to the heater line on the left side of the engine.

WARNING: Remember to disconnect the cord before driving. Damage to the 110-115 Volt AC electrical cord could cause electrocution.

Use the heater when temperatures below 0 В°F (-18 В°C) are expected to last for several days.

    Starting procedures
    Before starting your vehicle, adjust your seat, adjust both inside and outside mirrors, and fasten your seat belts. WARNING: Never leave children alone in a vehicle. Leaving children in a vehic ...

    Automatic transmission
    CAUTION: Damage to the transmission may occur if the following precautions are not observed: • Shift into PARK only after the vehicle has come to a complete stop. • Shift into or out of ...

    See also:

    Bluetooth version information
    This feature offers information about the Bluetooth version installed in the vehicle's infotainment system. This information can be found under Bluetooth menu Bluetooth software version in ...

    Incoming calls
    Press OK/MENU (or the thumb wheel on the steering wheel keypad) to answer a call, even if the infotainment system is currently in another mode (e.g., RADIO or MEDIA). Press EXIT to reject a c ...

    Securicodeв„ў keyless entry system (if equipped)
    You can use the keyless entry keypad to: • lock or unlock the doors without using a key, • activate or deactivate the Autolock and Autounlock feature if equipped • release the liftgate gla ...