Jeep Liberty: Flash Lights With Lock
The feature will cause the turn signal lights to flash when the doors are locked or unlocked with the RKE transmitter.
This feature can be turned on or turned off. To change the current setting, proceed as follows:
вЂў For vehicles equipped with the Electronic Vehicle Information Center (EVIC), refer to вЂњElectronic Vehicle Information Center (EVIC)/Personal Settings (Customer-Programmable Features)вЂќ in вЂњUnderstanding Your Instrument PanelвЂќ for further information.
вЂў For vehicles not equipped with the EVIC, perform the following steps:
1. Press and hold the UNLOCK button on a programmed (i.e., functional) RKE transmitter for at least 4 seconds, but no longer than 10 seconds. Then, press and hold the LOCK button while still holding the UNLOCK button.
2. Release both buttons at the same time.
3. Test the feature from outside the vehicle by pressing the LOCK and UNLOCK buttons on the RKE transmitter.
4. Repeat these steps if you want to return this feature to its previous setting.
NOTE: Pressing the LOCK button on the RKE transmitter while you are inside the vehicle will activate the Security Alarm. Opening a door with the Security Alarm activated will cause the alarm to sound. Press the UNLOCK button to deactivate the Security Alarm.
Tire pressures and wear
Maintaining the correct tire pressures helps to maximize the tiresвЂ™ service lives and is essential for good running performance. Check and, if necessary, adjust the pressure of each tire (inc ...
Energy Management Feature
This vehicle has a safety belt system with an energy management feature in the front seating positions to help further reduce the risk of injury in the event of a head-on accident. This safety ...
The program selector button allows you to choose between different driving characteristics. Program selector button For further information on the automatic drive program, see (). Press p ...