Range Rover Evoque: Folding and raising the rear seats
Folding and raising the rear seats
The split fold rear seat of 5 door models can be
folded completely, or partially at 60/40 split, to
accommodate loads and still retain seating for
To fold part or all of the seat:
1. Fully lower the head restraints.
2. Press either seat backrest release button,
then fold the appropriate backrest fully
Raising a folded seat is a reversal of the folding
When the seat back is fully raised and locked
into position, the release/locking button will
With the Coupe 3 door models, if a fold is
required, the smaller part must be folded first.
The larger part can then be folded.
Raising the Coupe folded seats is a reversal of
the folding process. Ensure that the
release/locking button relocates into the
Ensure that when the backrest
raised the locking mechanism is fully
engaged. If the backrests are not fully
locked in place, red markers will be
visible around the backrest buttons.
Adjust the head restraint so
top of the head restraint is above the
centre line of the head. An incorrectly
adjusted head restraint increases the
risk of death or serious injury in the
Never adjust the steering
while the vehicle is in motion.
1. Move the lever fully down to unlock the
column. Move the lever fully up to re-lock
2. Move the steering column u
When removing or installing flexible hydraulic pipes and hoses, make sure
that the following procedures are observed to
make sure component serviceability:
Prior to removal, clean area around hose or pipe end which is to be
Obtain appropriate blanking plugs or caps before disconn
If the vehicle battery is
disabled, do NOT attempt to tow the
vehicle. Towing may result in serious
damage to the transmission.
The vehicle should NOT be towed on all four
wheels. However, if the vehicle cannot be
recovered by using the correct method, please
adhere to the
В© 2011-2020 Copyright www.rrevoque.org