Toyota RAV4: Fuse layout and amperage ratings - Checking and replacing fuses - Do-it-yourself maintenance - Maintenanceand care - Toyota RAV4 Owner's ManualToyota RAV4: Fuse layout and amperage ratings

■ Engine compartment

Type A (driver’s side)

*1: Vehicles with towing package

*1: Vehicles with towing package
*2: Vehicles with 2.5 L 4-cylinder (2AR-FE) engine
*3: Vehicles with 3.5 L V6 (2GR-FE) engine

Type B (passenger’s side)

*1: Vehicles without towing package

*1: Vehicles without towing package
*2: Vehicles with towing package
*3: Vehicles with 2.5 L 4-cylinder (2AR-FE) engine
*4: Vehicles with 3.5 L V6 (2GR-FE) engine

■ Under the instrument panel

*: Vehicles without smart key system

*: Vehicles without smart key system

■After a fuse is replaced

●If the lights do not turn on even after the fuse has been replaced, a bulb may need replacement.
●If the replaced fuse blows again, have the vehicle inspected by your Toyota dealer.

■If there is an overload in the circuits

The fuses are designed to blow, protecting the wiring harness from damage.

CAUTION
■To prevent system breakdowns and vehicle fire
Observe the following precautions. Failing to do so may cause damage, and possibly a fire or injury.

●Never use a fuse of a higher amperage rating than indicated, or use any other object in place of a fuse.
●Always use a genuine Toyota fuse or equivalent. Never replace a fuse with a wire, even as a temporary fix. This can cause extensive damage or even fire.
●Do not modify fuses or the fuse box.

NOTICE
■Before replacing fuses
Have the cause of electrical overload determined and repaired by your Toyota dealer as soon as possible.

    Checking and replacing fuses
    If any of the electrical components do not operate, a fuse may have blown. If this happens, check and replace the fuses as necessary. 1 Vehicles without smart key system: Turn the engine switch off ...

    Light bulbs
    You may replace the following bulbs yourself. The difficulty level of replacement varies depending on the bulb. If necessary bulb replacement seems difficult to perform, contact your Toyota dealer. ...

    See also:

    Rollover warning
    Utility vehicles have a significantly higher rollover rate than other types of vehicles. This vehicle has a higher ground clearance and a higher center of gravity than many passenger cars. It is ...

    Xenon lamps
    High voltage is required to ignite the gas and metal vapour which are used to power Xenon lamps. Contact with this voltage can cause serious injury. Replacement or maintenance of Xenon lamps s ...

    Infotainment system volume
    If no phone call is in progress, volume for the infotainment system can be adjusted in the normal way with the infotainment system's VOL control or from the steering wheel keypad. Infotainment ...