Jeep Liberty: How To Disengage The Automatic Locking Mode
Unbuckle the combination lap/shoulder belt and allow it to retract completely to disengage the Automatic Locking Mode and activate the vehicle sensitive (emergency) locking mode.
вЂў The belt and retractor assembly must be replaced if the seat belt assembly Automatic Locking Retractor (ALR) feature or any other seat belt function is not working properly when checked according to the procedures in the Service Manual.
вЂў Failure to replace the belt and retractor assembly could increase the risk of injury in collisions.
Reprogramming a single garage door opener button
To programme a device to a previously programmed button: 1. Press and hold the desired pre-programmed HomeLink button for at least 20 seconds, but no longer than 30 seconds, until the indicator l ...
Defensive driving means вЂњalways expect the unexpected.вЂќ The first step in driving defensively is to wear the safety belt. See Safety Belts on page 3‑12. ○ Assume that other road use ...
Engine malfunction (amber)
Engine malfunction (amber) Illuminates briefly when the ignition is switched on. If the lamp flashes or illuminates at any other time, there is a fault with the engine. Avoid high speeds and se ...