Jeep Liberty: Jacking And Tire Changing
вЂў Do not attempt to change a tire on the side of the vehicle close to moving traffic. Pull far enough off the road to avoid the danger of being hit when operating the jack or changing the wheel.
вЂў Being under a jacked-up vehicle is dangerous. The vehicle could slip off the jack and fall on you. You could be crushed. Never put any part of your body under a vehicle that is on a jack. If you need to get under a raised vehicle, take it to a service center where it can be raised on a lift.
вЂў Never start or run the engine while the vehicle is on a jack.
вЂў The jack is designed to be used as a tool for changing tires only. The jack should not be used to lift the vehicle for service purposes. The vehicle should be jacked on a firm level surface only.
Avoid ice or slippery areas.
- Jack Location
- Spare Tire Stowage
- Spare Tire Removal
- Preparations For Jacking
- Jacking Instructions
- Road Tire Installation
Search & Send
"Search & Send" is a destination entry service. You can find further information on "Search & Send" in the separate COMAND operating instructions. ...
CAL This message is displayed when the compass needs to be calibrated. See Compass on page 5‑5. вЂ“ вЂ“ вЂ“ Three dashes will be displayed if the compass needs service. See your dealer fo ...
Modification/alterations to the electrical or fuel systems
MITSUBISHI MOTORS CORPORATION has always manufactured safe, high quality vehicles. In order to maintain this safety and quality, it is important that any accessory that is to be fitted, or any mod ...