Jeep Liberty: Jump-Starting Procedures - What To Do In Emergencies - Jeep Liberty Owner's ManualJeep Liberty: Jump-Starting Procedures

If your vehicle has a discharged battery it can be jumpstarted using a set of jumper cables and a battery in another vehicle or by using a portable battery booster pack. Jump-starting can be dangerous if done improperly so please follow the procedures in this section carefully.

NOTE: When using a portable battery booster pack follow the manufacturer’s operating instructions and precautions.

CAUTION!
Do not use a portable battery booster pack or any other booster source with a system voltage greater than 12 Volts or damage to the battery, starter motor, alternator or electrical system may occur.

WARNING!
Do not attempt jump-starting if the battery is frozen.

It could rupture or explode and cause personal injury.

Road Tire Installation
1. Mount the road tire on the axle. 2. Install the remaining lug nuts with the cone shaped end of the nut toward the wheel. Lightly tighten the lug nuts. WARNING! To avoid the risk of forcing ...

Preparations For Jump-Start
The battery in your vehicle is located in the front of the engine compartment, behind the left headlight assembly. NOTE: The positive battery post is covered with a protective cap. Lift up on the ...

See also:

Vehicle identification plate with vehicle identification number (VIN) and paint code number
Open the driver's door. You will see vehicle identification plate 1. Example: vehicle identification plate (USA only) 2 Paint code 3 VIN Example: vehicle identification plate (Canad ...

Scanning radio stations
■ Scanning the preset radio stations 1 Press and holduntil you hear a beep. Preset stations will be played for 5 seconds each. 2 When the desired station is reached, press once again. & ...

Driving with a Trailer
Towing a trailer requires experience. Get familiar with handling and braking with the added trailer weight. The vehicle is now longer and not as responsive as the vehicle is by itself. Check all ...