Jeep Liberty: Lap/Shoulder Belt Untwisting Procedure
Use the following procedure to untwist a twisted lap/ shoulder belt.
1. Position the latch plate as close as possible to the anchor point.
2. At about 6 to 12 in (15 to 30 cm) above the latch plate, grasp and twist the belt webbing 180 degrees to create a fold that begins immediately above the latch plate.
3. Slide the latch plate upward over the folded webbing.
The folded webbing must enter the slot at the top of the latch plate.
4. Continue to slide the latch plate up until it clears the folded webbing.
Manual transmission 5-speed automatic transmission Your vehicle is equipped with either a manual transmission or automatic transmission. The gearshift lever for each transmission type is shown ...
NOTE вЂў The sound source (AM, FM1, Disc, etc.) being played through the infotainment system's speakers cannot be controlled from the rear control panel. вЂў In order to select and play an ext ...
Loading a trailer
When loading the trailer, make sure that neither the permissible gross weight of the trailer nor the gross vehicle weight are exceeded. The permissible gross vehicle weight is indicated on th ...