Honda CR-V: Loading Discs in the In-dash Disc Changer
Your vehicleвЂ™s in-dash disc changer
holds up to six discs.
1. Press the LOAD button until you
hear a beep and see вЂвЂLOADвЂ™вЂ™ on
To load only one CD, press and
release the LOAD button.
2. The disc number for an empty
position is highlighted and the red
disc load indicator starts blinking.
3. Insert the disc into the disc slot
when the green disc load indicator
comes on. Insert it only about
halfway; the drive will pull it in the
rest of the way. You will see
вЂвЂBUSYвЂ™вЂ™ in the display while the
disc load indicator turns red and
blinks as the disc is loaded.
You cannot load and play 3-inch
(8-cm) discs in this system.
4. When the disc load indicator turns
green and вЂвЂLOADвЂ™вЂ™ appears in the
display again, insert the next disc
in the slot. Do not try to insert a
disc until вЂвЂLOADвЂ™вЂ™ appears. You
could damage the audio unit.
5. Repeat this until all six positions
are loaded. If you are not loading
all six positions, the system begins
playing the last disc loaded.
You can also load a disc into an
empty position while a disc is playing
by pressing the appropriate preset
button. The system stops playing the
current disc and starts the loading
sequence. It then plays the disc just
Each time you press the TITLE
button, the display shows you the
text, if the disc was recorded with
You can see the album, artist, and
track name in the display. If a disc is
You can use the SEEK button while
a disc is playing to change tracks
(files in MP3/WMA mode).
In MP3/WMA mode, use the
button to select
folders in the disc, and use the SEEK
Press the AM, FM, AUX button, or
CD/AUX, XM button to switch to
the radio or satellite radio (U.S.
models), while a disc is playing.
Press the CD button again to play
If you turn th
1. Connect the Honda Diagnostic System (HDS) to the
data link connector (DLC) (see step 2).
2. Turn the ignition switch ON (II).
3. Make sure the HDS communicates with the vehicle
and the powertrain control module (PCM). If it
doesn't communicate, troubleshoot the DLC circuit.
4. Check for DTCs.
The automatic climate control
system in your vehicle maintains the
interior temperature you select. The
system also adjusts the fan speed
and airflow levels.
1. Press the AUTO button.
2. Set the desired temperature by
turning the driverвЂ™s side
temperature control dial. You will
В© 2016-2020 Copyright www.hcrv.net