Jeep Liberty: Making A Second Call While Current Call Is In Progress - Phone Call Features - Uconnect™ Phone — If Equipped - Understanding The Features Of Your Vehicle - Jeep Liberty Owner's ManualJeep Liberty: Making A Second Call While Current Call Is In Progress

To make a second call while you are currently on a call, press the “Call” followed button and say “Dial” or “Call” followed by the phone number or phonebook entry you wish to call. The first call will be on hold while the second call is in progress. To go back to the first call, refer to “Toggling Between Calls” in this section. To combine two calls, refer to “Conference Call” in this section.

    Answer Or Reject An Incoming Call — Call Currently In Progress
    If a call is currently in progress and you have another incoming call, you will hear the same network tones for call waiting that you normally hear when using your mobile phone. Press the butto ...

    Place/Retrieve A Call From Hold
    To put a call on hold, press the button until you hear a single beep. This indicates that the call is on hold. To bring the call back from hold, press and hold the button until you hear a s ...

    See also:

    For cold and snow weather
    Ventilation slots The ventilation slots in front of the windscreen should be brushed clear after heavy snowfall so that the operation of the heating and ventilation systems will not be impaired. ...

    Unable to Connect to OnStar Message
    If there is limited cellular coverage or the cellular network has reached maximum capacity, this message may come on. Push Q to try the call again or try again after driving a few miles into anoth ...

    Immobilizer System
    The immobilizer system protects your vehicle from theft. If an improperly coded key (or other device) is used, the engine’s fuel system is disabled. When you turn the ignition switch to t ...