Jeep Liberty: Operation Instructions - Auxiliary Mode
The auxiliary (AUX) jack is an audio input jack which allows the user to plug in a portable device such as an MP3/WMA player, cassette player, or microphone and utilize the vehicleвЂ™s audio system to amplify the source and play through the vehicle speakers.
Pressing the AUX button will change the mode to auxiliary device if the AUX jack is connected.
NOTE: The AUX device must be turned on and the deviceвЂ™s volume set to the proper level. If the AUX audio is not loud enough, turn the deviceвЂ™s volume up. If the AUX audio sounds distorted, turn the deviceвЂ™s volume down.
SEEK Button (Auxiliary Mode)
SCAN Button (Auxiliary Mode)
EJECT Button (Auxiliary Mode)
TIME Button (Auxiliary Mode)
Press the TIME button to change the display from elapsed playing time to time of day. The time of day will display for five seconds.
RW/FF (Auxiliary Mode)
SET Button (Auxiliary Mode)
Electronic Speed Control вЂ” If Equipped
When engaged, the Electronic Speed Control takes over accelerator operations at speeds greater than 25 mph (40 km/h). The Electronic Speed Control buttons are located on the right side of the s ...
Hill start assist system (MT models)
Ensure that the Hill start assist system operates properly under the following circumstances: 1. Stop the vehicle on an uphill grade by depressing the brake pedal and clutch pedal, with the ...
While the downhill assist control system is operating
The slip indicator will flash to indicate that the downhill assist control system is operating, and the stop lights and high mounted stoplight will turn on. ■Conditions in which the downh ...