Jeep Liberty: Operation Instructions - (Disc Mode For CD And MP3/WMA Audio Play, DVD-Video)
The radio DVD player and many DVD discs are coded by geographic region. These region codes must match in order for the disc to play. If the region code for the DVD disc does not match the region code for the radio DVD player, it will not play the disc. Customers may take their vehicle to an authorized dealer to change the region code of the player a maximum of five times.
The radio may shut down during extremely hot conditions. When this occurs, the radio will indicate вЂњDisc HotвЂќ and shut off until a safe temperature is reached. This shutdown is necessary to protect the optics of the DVD player and other radio internal components.
NOTE: The ignition switch must be in the ON or ACC position to operate the radio.
LOAD Button вЂ” Loading Compact Disc(s)
Press the LOAD button and the pushbutton with the corresponding number (1-6) where the CD is being loaded. The radio will display PLEASE WAIT and prompt when to INSERT DISC. After the radio displays INSERT DISC, insert the CD into the player.
Radio display will show LOADING DISC when the disc is loading and вЂњREADING DISCвЂќ when the radio is reading the disc.
This CD player will accept 4вЂ“3/4 in (12 cm) discs only.
The use of other sized discs may damage the CD player mechanism.
Eject Button вЂ” Ejecting Compact Disc(s)
Press the EJECT button and the pushbutton with the corresponding number (1-6) where the CD was loaded and the disc will unload and move to the entrance for easy removal. Radio display will show EJECTING DISC when the disc is being ejected and prompt the user to remove the disc.
Press and hold the EJECT button for five seconds and all CDs will be ejected from the radio.
The disc can be ejected with the radio and ignition OFF.
SEEK Button (CD MODE)
Press the right SEEK button for the next selection on the CD. Press the left SEEK button to return to the beginning of the current selection, or return to the beginning of the previous selection if the CD is within the first second of the current selection. Pressing and holding the SEEK button will allow you to scroll through the tracks faster in CD and MP3/MWA modes.
SCAN Button (CD MODE)
Press the SCAN button to scan through each track on the CD currently playing.
TIME Button (CD MODE)
Press this button to change the display from a large CD playing time display to a small CD playing time display.
RW/FF (CD MODE)
Press and hold FF (Fast Forward) and the CD player will begin to fast forward until FF is released, or RW or another CD button is pressed. The RW (Rewind) button works in a similar manner.
AM or FM Button (CD MODE)
Switches the radio into the AM or FM radio mode.
USB Flash Memory Device Error Messages
If you see an error message on the audio display while playing a USB flash memory device, find the solution in the chart to the right. If you cannot clear the error message, take your vehicl ...
Chart symbols: I- Inspect these items and their related parts. If necessary, correct, clean, refill, adjust of replace. R- Replace or change L- Lubricate. (1) Refer to the lubricant and cool ...
Tv controls See 104, TOUCH SCREEN OVERVIEW. 1. TV/My video. TV band/video input selection: - Touch the + icon to view and select either digital (DTV 1 or DTV 2 - Digital) or analogue (TV - Ana ...