GMC Terrain: Parking Brake - Initial Drive Information - In Brief - GMC Terrain Owner's ManualGMC Terrain: Parking Brake

To set the parking brake, hold the regular brake pedal down, then push the parking

To set the parking brake, hold the regular brake pedal down, then push the parking brake pedal down.

If the ignition is on, the brake system warning light will come on. See Brake System Warning Light on page 5‑16.

To release the parking brake, hold the regular brake pedal down, then push down momentarily on the parking brake pedal until you feel the pedal release. Slowly pull your foot up off the park brake pedal.

    Climate Controls
    The vehicle's heating, cooling, defrosting, and ventilation can be controlled with these systems. Climate Control System A. Fan Control B. Air Delivery Mode Controls C. Temperature Control ...

    See also:

    Driving on sand
    WARNING Do not reduce the tire inflation pressure before driving through sand. However, if you do so, remember to correct the tire inflation pressure before continuing your trip. Driving wit ...

    Insrtument cluster
    FUEL GAUGE The needle on the gauge indicates the approximate fuel level in the fuel tank. The fuel capacity is given in Section 9. ENGINE COOLANT TEMPERATURE GAUGE WARNING: Never remove ...

    Emissions inspection and maintenance programs
    In some localities, it may be a legal requirement to pass an inspection of your vehicle’s emissions control system. Failure to pass could prevent vehicle registration. For states that require ...