Jeep Liberty: Parksense Sensors - Parksense Rear Park Assist — If Equipped - Understanding The Features Of Your Vehicle - Jeep Liberty Owner's ManualJeep Liberty: Parksense Sensors

The four ParkSense sensors, located in the rear fascia/ bumper, monitor the area behind the vehicle that is within the sensors’ field of view. The sensors can detect obstacles from approximately 12 in (30 cm) up to 79 in (200 cm) from the rear fascia/bumper in the horizontal direction, depending on the location, type and orientation of the obstacle.

    Parksense Rear Park Assist — If Equipped
    The ParkSense Rear Park Assist system provides visual and audible indications of the distance between the rear fascia and a detected obstacle when backing up, e.g. during a parking maneuver. Refe ...

    Parksense Warning Display
    The ParkSense Warning screen will only be displayed if Sound and Display is selected from the Customer- Programmable Features section of the Electronic Vehicle Information Center (EVIC). Refer t ...

    See also:

    Intelligent Key operation
    You can lock or unlock the doors without taking the key out from your pocket or bag. When you carry the Intelligent Key with you, you can lock or unlock all doors by pushing the door handle ...

    Jack Location
    The scissor-type jack and tire changing tools are located in the cargo compartment behind a trim cover on the left rear trim panel. The latch is located at the bottom of the trim cover. Jack ...

    Exterior Lighting
    The exterior lamp control is located on the turn signal/lane change lever. : Turn to operate the exterior lamps. : Turns the exterior lamps off. AUTO: Turns the exterior lamps on and off automat ...