Honda CR-V: Preparing to Drive
You still need to exercise the same
care when accelerating, steering, and
braking that you would in a twowheel
1. Make sure all windows, mirrors,
and outside lights are clean and
unobstructed. Remove frost, snow,
2. Check that the hood is fully closed.
3. Visually check the tires. If a tire
looks low, use a gauge to check its
4. Check that any items you may be
carrying are stored properly or
fastened down securely.
5. Check the seat adjustment.
6. Check the adjustment of the
inside and outside mirrors.
7. Check the steering wheel adjustment.
8. Make sure the doors and the
tailgate are securely closed and
9. Fasten your seat belt. Check that
your passengers have fastened
their seat belts.
10. When you start the engine, check
the gauges and indicators in the
1. Apply the parking brake.
2. In cold weather, turn off all
electrical accessories to reduce
the drain on the battery.
3. Make sure the shift lever is in
Park. Press on the brake pedal.
These indicators on the instrument
panel show which position the shift
lever is in.
The вЂвЂDвЂ™вЂ™ indicator comes on for a
few seconds when you turn the
ignition switch to the ON (II)
Intake Manifold Removal and Installation
1. Remove the hood support rod, then use it as shown
to prop the hood in the wide-open position.
2. Remove the bulkhead cover.
3. Disconnect the fan motor connectors (A) and hood
switch connector (B), then remove the harness clips
Store or secure all items that could
be thrown around and hurt
someone during a crash.
Be sure items placed on the floor
behind the front seats cannot roll
underneath and interfere with the
proper operation of the seats, the
sensors under the seats, or the
driverвЂ™s ability to operat
В© 2016-2020 Copyright www.hcrv.net