Ford Escape: Replacing high-mount brake lamp bulbs - Replacing headlamp bulbs - Bulb Replacement - Lights - Ford Escape Owner's ManualFord Escape: Replacing high-mount brake lamp bulbs

1. Remove the two screws and move the lamp assembly away from the liftgate.

2. Remove the bulb holder from the

2. Remove the bulb holder from the lamp assembly by pressing the snaps.

3. Pull the bulb straight out of the

3. Pull the bulb straight out of the socket and push in the new bulb.

Install the new bulbs in reverse order.

Replacing license plate lamp bulbs

    Replacing tail/stop/turn/backup lamp bulbs
    The tail/stop/turn/sidemarker/backup lamp bulbs are located in the same portion of the tail lamp assembly, one just below the other. Follow the same steps to replace either bulb: 1. Make sure the ...

    Replacing license plate lamp bulbs
    1. Make sure the headlamp switch is in the off position. 2. Press the lever and carefully pry the license plate lamp assembly (located above the license plate) from the liftgate. 3. Rotate the b ...

    See also:

    Windshield wipers
    Windshield wipers OFF: Off : Intermittent LO: Low speed HI: High speed To turn the wipers on, push the wiper control lever down. To turn the wipers off, return the lever to the “OFF ...

    Selecting device
    1. Select the “SELECT AUDIO” (type C audio)/“Select Audio Player” (type D audio) menu. If no devices are registered, “EMPTY” is displayed and the mode changes to the Bluetooth® au ...

    Armrest
    Armrest To lower the armrest, pull on the top edge of the armrest. To avoid the possibility of serious injury, passengers must never be allowed to sit on the center armrest while the v ...