Jeep Liberty: Reset - Power Windows - Windows - Things To Know Before Starting Your Vehicle - Jeep Liberty Owner's ManualJeep Liberty: Reset

It may be necessary at some point in time to reactivate the Auto Up feature. To do so, perform the following procedure:

1. Pull the window switch up to close the window completely and continue to hold the switch up for an additional two seconds after the window is closed.

2. Push the window switch down firmly to the second detent to open the window completely and continue to hold the switch down for an additional two seconds after the window is fully open.

    Auto Up Feature With Anti-Pinch Protection — If Equipped
    On some models, the driver’s and front passenger’s (if equipped for passenger side) power window switches have an “Auto Up” feature. Pull the window switch fully upward to the second det ...

    Window Lockout Button
    The window lockout button on the driver’s door trim panel allows you to disable the window control on the rear doors. To disable the window control on the other doors, press and release the wi ...

    See also:

    Scanning
    SCAN automatically searches through the list of satellite channels. The search will only be carried out in the selected category, see page 215 for more detailed information on the scan functio ...

    Driving the vehicle
    The following procedures should be observed to ensure safe driving. ■ Starting the engine ■ Driving 1 With the brake pedal depressed, shift the shift lever to D. 2 Release the parking ...

    Folding Seats
    Folding Rear Seats To fold the rear seats forward: 1) Remove the luggage compartment cover. 2) Stow the seat belt buckles of the center and left seating position into the pocket of the seat cush ...