Ford Escape: Returning the second row seats to upright position
1. Pull seatback up and into upright position making sure seatback locks into place and the red seat unlatched indicator on release paddle is not visible.
2. Rotate seat cushion down into the seating position making sure that the seat cushion is locked into place and that the safety belt buckles are exposed.
WARNING: Make sure safety belt buckle heads are through elastic holders on seat backs. Safety belt buckles may break if they are trapped underneath the seatback as the seatback is rotated down.
WARNING: Before returning the seatback to its original position, make sure that cargo or any objects are not trapped behind the seatback. After returning the seatback to its original position, reinstall the head restraints, and pull on the seatback to ensure that it has fully latched. An unlatched seat may become dangerous in the event of a sudden stop or collision.
3. Unsnap the safety belt webbing from the quarter trim panel.
4. Remove the second row head restraint from underneath the front seat and reinstall. See Second row adjustable head restraints in this chapter.
Engine oil check
Check the engine oil weekly. If any significant or sudden drop in oil level is noted, seek qualified assistance. Never allow the oil level to fall below the lower mark or notch on the dipstick. ...
Vehicles equipped with Park Assist
Colored fields (4-one per sensor) indicate distance If the vehicle is equipped with the optional Park Assist system, the distance to an object will be indicated more exactly and colored markers ...
Select lever and gear position indicator (AT models)
Type A Type B This indicator shows the position of the select lever. When the manual mode is selected, the gear position indicator (which shows the current gear selection) and the ups ...