Jeep Liberty: Seat Belt Lock Out - Occupant Restraints - Things To Know Before Starting Your Vehicle - Jeep Liberty Owner's ManualJeep Liberty: Seat Belt Lock Out

The center rear seat belt system has a lock out feature that will not allow you to extract the center webbing unless the rear seat upper latch is engaged.

    Lap/Shoulder Belt Untwisting Procedure
    Use the following procedure to untwist a twisted lap/ shoulder belt. 1. Position the latch plate as close as possible to the anchor point. 2. At about 6 to 12 in (15 to 30 cm) above the latch pl ...

    Seat Belts In Passenger Seating Positions
    The seat belts in the passenger seating positions are equipped with Automatic Locking Retractors (ALR) which are used to secure a child restraint system. For additional information, refer to “ ...

    See also:

    Using a flat bed truck
    If you use chains or cables to tie down your vehicle, the angles shaded in black must be 45В°. Do not overly tighten the tie downs or the vehicle may be damaged. ■Emergency towing proced ...

    Limited-Use Spare – If Equipped
    The limited-use spare tire is for temporary emergency use only. This tire is identified by a label located on the limited-use spare wheel. This label contains the driving limitations for this sp ...

    Vehicle Dynamic Control (VDC) OFF switch
    Vehicle Dynamic Control (VDC) OFF switch The vehicle should be driven with the Vehicle Dynamic Control (VDC) system on for most driving conditions. If the vehicle is stuck in mud or snow, the ...