Jeep Liberty: Seat Belts - Safety Checks You Should Make Inside The Vehicle - Safety Tips - Things To Know Before Starting Your Vehicle - Jeep Liberty Owner's ManualJeep Liberty: Seat Belts

Inspect the belt system periodically, checking for cuts, frays, and loose parts. Damaged parts must be replaced immediately. Do not disassemble or modify the system.

Front seat belt assemblies must be replaced after a collision. Rear seat belt assemblies must be replaced after a collision if they have been damaged (i.e., bent retractor, torn webbing, etc.). If there is any question regarding belt or retractor condition, replace the belt.

    Air Bag Warning Light
    The light should come on and remain on for four to eight seconds as a bulb check when the ignition switch is first turned ON. If the light is not lit during starting, see your authorized dealer. ...

    See also:

    Rear lamp bulbs
    1. Remove the two fixings. 2. Direction indicator. 3. Reversing lamp Turn the relevant bulb holder counter clockwise and pull to remove from the lamp unit. Grip the holder then press the bulb i ...

    Installing child restraint systems with A/ELR seatbelt
    - Child restraint systems and seatbelts can become hot in a vehicle that has been closed up in sunny weather; they could burn a small child. Check the child restraint system before you p ...

    Playing a Disc (EX-L model with navigation system)
    Playing a Disc (EX-L model with navigation system) ...