Jeep Liberty: Shift Positions
The transfer case switch is located on the center console next to the shift lever.
Transfer Case Switch
Rear Wheel Drive High Range - This range is used for normal street and highway driving on dry hard-surfaced roads.
Four-Wheel Drive High Range - This range locks the front driveshaft and rear driveshaft together forcing the front and rear wheels to rotate at the same speed. Additional traction for loose or slippery road surfaces only.
Four-Wheel Drive Low Range - This range provides low speed four-wheel drive. Locks the front driveshaft and rear driveshaft together forcing the front and rear wheels to rotate at the same speed. Additional traction and maximum pulling power for loose or slippery road surfaces only. Do not exceed 25 mph (40 km/h).
Neutral - This range disengages both the front driveshaft and rear driveshaft from the powertrain. To be used for flat towing behind another vehicle. Refer to вЂњRecreational TowingвЂќ in вЂњStarting and OperatingвЂќ for further information.
Cargo tie-down rings
Observe the following notes on securing loads: secure the load using the cargo tie down rings. do not use elastic straps or nets to secure a load, as these are only intended as an anti-slip p ...
Changing the Set Speed
You can increase the set cruising speed in any of these ways: Press and hold the RES/ACCEL button. When you reach the desired cruising speed, release the button. To increase the speed in ver ...
To activate: press button 1 for at least one second. An alarm sounds and the exterior lighting flashes. To deactivate: press button 1 again. or Insert the SmartKey into the ign ...