Jeep Liberty: Shift Positions
The transfer case switch is located on the center console next to the shift lever.
Transfer Case Switch
Rear Wheel Drive High Range - This range is for normal street and highway driving on dry hard-surfaced roads.
Four-Wheel Drive Auto High Range вЂ“ This active ondemand range makes available optimum traction for a wide range of conditions, while maximizing driver convenience.
This position is always in four-wheel drive mode, with a normal 42% front axle, 58% rear axle torque split. The system also anticipates and prevents slip by redirecting torque as necessary, up to 100% to the front or rear axle, if needed.
Four-Wheel Drive Low Range - This range is for low speed four-wheel drive. Locks the front driveshaft and rear driveshaft together forcing the front and rear wheels to rotate at the same speed. Additional traction and maximum pulling power for loose or slippery road surfaces only. Do not exceed 25 mph (40 km/h).
Neutral - This range disengages both the front driveshaft and rear driveshaft from the powertrain. To be used for flat towing behind another vehicle. Refer to вЂњRecreational TowingвЂќ in вЂњStarting and OperatingвЂќ for further information.
To ensure proper engine performance and long life, careful attention must be paid to engine oil. Following these simple, but important steps will help protect your investment: ○ Always use ...
A/T Selector Position Indicator (if equipped)
A/T Selector Position Indicator (if equipped) When the ignition switch is in the вЂњONвЂќ position, this indicator shows the selector position of automatic transmission. ...
FM-AM-SAT(if so equipped) radio operation
radio (FM/AM) band select: Pushing the radio band select button will change the band as follows: AM FM1 FM2 AM radio (SAT) band select (models with satellite radio): Pushing the XM b ...