GMC Terrain: Starting the Engine Using Remote Start - Remote Vehicle Start - Keys and Locks - Keys, Doors, and Windows - GMC Terrain Owner's ManualGMC Terrain: Starting the Engine Using Remote Start

To start the engine using the remote start feature:

1. Press and release transmitter. on the RKE transmitter.

2. Press and hold seconds. The turn signal lamps will briefly flash to confirm the vehicle has been for about two seconds. The turn signal lamps will briefly flash to confirm the vehicle has been started. The parking lamps will turn on and remain on as long as the engine is running. The vehicle's doors will be locked.

3. The key must be inserted and turned to ON/RUN before driving.

The engine will shut off after 10 minutes unless a time extension is done or the key is inserted and turned to ON/RUN.

    Remote Vehicle Start
    The vehicle may have this feature that allows you to start the engine from outside the vehicle. (Remote Vehicle Start): This button will be on the RKE transmitter if the vehicle has remote start. ...

    Extending Engine Run Time
    For a 10-minute extension, repeat Steps 1 and 2 while the engine is still running. The remote start can be extended once. When the remote start is extended, the second 10 minutes will start immedia ...

    See also:

    Epb manual use
    Epb manual use 1. To apply the parking brake, with the vehicle stationary, pull up the lever and release it. The parking brake warning lamp will illuminate. It is important to confirm that th ...

    Steering Wheel Audio Controls
    The remote sound system controls are located on the rear surface of the steering wheel. Reach behind the wheel to access the switches. Remote Sound System Controls (Back View Of Steering Wheel) ...

    Glove box
    o To open the glove box, pull on the glove box release lever. o The glove box door can be locked (and unlocked) with the key. (If installed) WARNING: To avoid the possibility of injury in c ...