Jeep Liberty: Tire Chains
Use only compact chains, or other traction aids that meet SAE type вЂњClass SвЂќ specifications. Chains must be the proper size for the vehicle, as recommended by the chain manufacturer. In addition, only install tire chains of the rear tires with P225/75R16 or smaller tires.
To avoid damage to your vehicle, tires, or chains, observe the following precautions:
вЂў Do not use tire chains on vehicles equipped with tires other than P225/75R16 or smaller tires. There may not be adequate clearance for the chains and you are risking structural or body damage to your vehicle.
вЂў Because of limited chain clearance between tires and other suspension components, it is important that only chains in good condition are used. Broken chains can cause serious vehicle damage. Stop the vehicle immediately if noise occurs that could suggest chain breakage. Remove the damaged parts of the chain before further use.
вЂў Install chains on the rear wheels as tightly as possible and then retighten after driving about 1⁄2 mile (0.8 km).
вЂў Do not exceed 45 mph (72 km/h).
вЂў Drive cautiously and avoid severe turns and large bumps, especially with a loaded vehicle.
вЂў Use on Rear Wheels only.
вЂў Do not drive for a prolonged period on dry pavement.
вЂў Observe the tire chain manufacturerвЂ™s instructions on method of installation, operating speed, and conditions for use. Always use the lower suggested operating speed of the chain manufacturer if different from the speed recommended by the manufacturer.
These cautions apply to all chain traction devices, including link and cable (radial) chains.
The brake lights come on automatically when the brakes are applied. Adaptive brake lights The adaptive brake lights activate in the event of sudden braking or if the ABS system is activated. Th ...
Skip channel selection
When in the SAT mode, press the following button continuously (type A, B and C audio)/briefly (type D audio) to change to the channel selection mode. Type A and B audio: Type C audio: Typ ...
Entry by town
If a town name is entered first, the points of interest listed will be restricted to that town. - From the Input POI Name screen, touch Town. - Enter the town name required. - Touch List to displ ...