Jeep Liberty: Tire Psi - Electronic Vehicle Information Center (EVIC) — If Equipped - Understanding Your Instrument Panel - Jeep Liberty Owner's ManualJeep Liberty: Tire Psi

Press and release the MENU button until Tire PSI is displayed.

Tire pressure information is displayed as follows:

• If tire pressure is OK for all tires, TIRE and a vehicle graphic are displayed with tire pressure values in each corner or the graphic.

• If one or more tires have low pressure, LOW TIRE and a vehicle graphic are displayed with tire pressure values in each corner of the graphic. Tire pressure values that are too low will be flashing.

• If the Tire Pressure System requires service, Service TPM System is displayed. Tire PSI is an information only function and cannot be reset.

    Distance To Empty (DTE)
    Shows the estimated distance that can be traveled with the fuel remaining in the tank. This estimated distance is determined by a weighted average of the instantaneous and average fuel economy, ...

    Elapsed Time
    Shows the total elapsed time of travel since the last reset. Elapsed time will increment when the ignition switch is in the RUN or START position. Elapsed time is displayed as follows: hours:min ...

    See also:

    Modification and disposal of SRS airbag system components
    Do not dispose of your vehicle or perform any of the following modifications without consulting your Toyota dealer. The SRS airbags may malfunction or deploy (inflate) accidentally, causing death o ...

    Conditions preventing automatic engine stop
    The engine will not automatically stop if:<> - the external temperature is below approximately 0В°C (32В°F) - the external temperature is above approximately40В°C (104В°F) - engine has not re ...

    2.5L I4 engine
    ...