Jeep Liberty: To Disarm The System
Either press the UNLOCK button on the RKE transmitter or insert a valid Sentry Key into the ignition lock cylinder and turn the key to the ON/RUN position.
вЂў Unlocking the doors with the manual door lock plungers or the driverвЂ™s door lock cylinder will not disarm the Vehicle Security Alarm.
вЂў When the Vehicle Security Alarm is armed, the interior power door lock switches will not unlock the doors.
The Vehicle Security Alarm is designed to protect your vehicle; however, you can create conditions where the Vehicle Security Alarm will give you a false alarm. If the previously described arming sequence has occurred, the Vehicle Security Alarm will arm regardless of whether you are inside or outside the vehicle. If you remain inside the vehicle and open a door, the alarm will sound. If this occurs, disarm the Vehicle Security Alarm.
If something has triggered the Vehicle Security Alarm in your absence, the horn will sound three times and the exterior lights blink three times when you unlock the doors. Check the vehicle for tampering.
Federal Communications Commission (FCC) Rules and with Industry Canada Standards
See Radio Frequency Statement on page 13‑21 for information regarding Part 15 of the Federal Communications Commission (FCC) Rules and with Industry Canada Standards RSS-GEN/210/220/310. ...
Fuel Filler Cap (Gas Cap)
The gas cap is located behind the fuel filler door, on the driverвЂ™s side of the vehicle. If the gas cap is lost or damaged, be sure the replacement cap has been designed for use with this vehi ...
When Should an Airbag Inflate?
Frontal airbags are designed to inflate in moderate to severe frontal or near-frontal crashes to help reduce the potential for severe injuries mainly to the driver's or right front passenger ...