Jeep Liberty: To Exit Remote Start Mode And Drive The Vehicle - How To Use Remote Start - Remote Starting System — If Equipped - Things To Know Before Starting Your Vehicle - Jeep Liberty Owner's ManualJeep Liberty: To Exit Remote Start Mode And Drive The Vehicle

Before the end of the 15-minute cycle, press and release the UNLOCK button on the RKE transmitter to unlock the doors and disarm the Vehicle Security Alarm (if equipped). Then, insert the key into the ignition switch and turn the switch to the ON/RUN position.

NOTE: The ignition switch must be in the ON/RUN position in order to drive the vehicle.

    To Exit Remote Start Mode Without Driving The Vehicle
    Press and release the REMOTE START button one time or allow the engine to run for the entire 15-minute cycle. NOTE: To avoid unintentional shut downs, the system will disable the one-time press o ...

    See also:

    Using Operator Mode
    Press the switch rearward and hold it, the Sky Sliderв„ў will open from the front and move toward the rear of the vehicle. Press the switch forward and hold it, the Sky Sliderв„ў will open from ...

    Fuse layout and amperage ratings
    ■ Engine compartment Type A (driver’s side) *1: Vehicles with towing package *2: Vehicles with 2.5 L 4-cylinder (2AR-FE) engine *3: Vehicles with 3.5 L V6 (2GR-FE) engine Type B ( ...

    Wind Buffeting
    Wind buffeting can be described as the perception of pressure on the ears or a helicopter-type sound in the ears. Your vehicle may exhibit wind buffeting with the windows down, or the sunroof or ...