Jeep Liberty: To Set A Desired Speed - Electronic Speed Control — If Equipped - Understanding The Features Of Your Vehicle - Jeep Liberty Owner's ManualJeep Liberty: To Set A Desired Speed

Turn the Electronic Speed Control ON. When the vehicle has reached the desired speed, press the SET (-) button and release. Release the accelerator and the vehicle will operate at the selected speed.

NOTE: The vehicle should be traveling at a steady speed and on level ground before pressing the SET button.

    To Activate
    Push the ON/OFF button. The Cruise Indicator Light in the instrument cluster will illuminate. To turn the system off, push the ON/OFF button a second time. The Cruise Indicator Light will turn o ...

    To Deactivate
    A soft tap on the brake pedal, pushing the CANCEL button, or normal brake pressure while slowing the vehicle will deactivate Electronic Speed Control without erasing the set speed memory. Pressi ...

    See also:

    Steering Wheel Controls
    For vehicles with audio steering wheel controls, some audio controls can be adjusted at the steering wheel. (Push to Talk): For vehicles with BluetoothВ® or OnStarВ®, press to interact with th ...

    Emission Compliance Label (for U.S.A.)
    Emission Compliance Label (for U.S.A.) The EPA emission compliance label is located under the hood. ...

    Select lever
    : Shifting is possible with the brake pedal depressed. : Shifting is possible whether the brake pedal is depressed or not. However, while the ignition switch is in the “LOCK” ...