Hyundai Tucson: Traction control system (TCS)
On slippery road surfaces, the traction control system (TCS) limits the drive wheels from spinning excessively, thus helping the car to accelerate. It also helps to provide sufficient driving force and steering performance as the car turns.
Limits the drive wheels from spinning excessively during starting or while making accelerated turns on slippery roads to avoid losing the driving force of the front wheels.
TCS does not actively apply brakes. Be sure to decelerate the car sufficiently before entering curves.
CAUTION: When the TCS indicator blinks, SLIP control function has been activated. It also means that the road is slippery or your car is accelerating excessively. In this situation, gently release foot pressure from the accelerator pedal and maintain moderate speed.
WARNING: Traction control is a driving aid; all normal precautions for driving in inclement weather and on slippery driving surfaces should be observed.
TCS ON/OFF Mode
When the TCS is operating, the TCS indicator in the instrument cluster will blink. If you turn the system off by pressing the TCS switch, the TCS-OFF indicator will come on and stay on. In the TCS-OFF mode, the SLIP control will be deactivated. Adjust you driving accordingly. To turn the system back on, press the switch again. The TCS-OFF indicator should go off.
NOTE: 1) The TCS mode will automatically be turned ON after the engine is turned off and restarted. 2) When the traction control system is operating properly, you can feel a slight pulsation in the vehicle. This is only the effect of brake control and indicates nothing unusual. 3) When the engine starts, a click may be heard from the engine compartment; this is the sound of the traction control being checked. 4) When moving out of the mud or fresh snow, pressing the accelerator pedal may not cause the engine speed to increase due to TCS operation.
Indicators and Warning
The indicators should illuminate when the ignition key is turned to ON or START but should go out after approximately three seconds. If the indicators do not illuminate, or the TCS or TCS-OFF indicator does not go out after 3 seconds, have the system checked by an authorized dealer. Should there be any unusual conditions in the TCS System while driving, TCS-OFF indicator illuminates as a warning. If TCS-OFF indicator illuminates, pull your car to a safe place and stop the engine. Then, start the engine again to check if the TCSOFF indicator goes out. If the indicator remains lit even after the engine has been started, have your car checked by an authorized Hyundai dealer.
NOTE: When the TCS-OFF indicator illuminates, traction control is automatically deactivated.
Checking the coolant level
Checking the coolant level 1) вЂњFULLвЂќ level mark 2) вЂњLOWвЂќ level mark Check the coolant level at each fuel stop. 1. Check the coolant level on the outside of the reservoir while the eng ...
Accessing the tire sealing system
The tire sealing system is stowed under the floor of the cargo area. To access it: 1. Lift the floor hatch in the cargo area. 2. Lift out the tire sealing system. NOTE вЂў The tire sealing syste ...
TPMS Sensor Matching Process
Each TPMS sensor has a unique identification code. The identification code needs to be matched to a new tire/wheel position after rotating the tires or replacing one or more of the TPMS sensors. T ...