Jeep Liberty: Traction Control System (TCS)
This system monitors the amount of wheel spin of each of the driven wheels. If wheel spin is detected, brake pressure is applied to the slipping wheel(s) and engine power is reduced to provide enhanced acceleration and stability. A feature of the TCS system functions similar to a limited slip differential and controls the wheel spin across a driven axle. If one wheel on a driven axle is spinning faster than the other, the system will apply the brake of the spinning wheel. This will allow more engine torque to be applied to the wheel that is not spinning.
This feature remains active even if TCS and ESC are in the вЂњPartial OffвЂќ mode or the вЂњFull OffвЂќ mode. Refer to вЂњElectronic Stability Control (ESC)вЂќ in this section for further information.
Deleting the phonebook data
1. Select the вЂњDELETE ENTRYвЂќ menu. 2. Select the phone number by performing either of the following procedures. вЂ“ Operate the вЂњTUNE/TRACK/CHвЂќ dial вЂ“ Press the talk switch and say ...
On vehicles with a sunroof, the switches used to operate it are on the headliner above the rearview mirror. The ignition must be in ON/ RUN or ACC/ACCESSORY, or in Retained Accessory Power (RAP) t ...
Fast-forwarding and fast-reversing
Fast forward or reverse is operated in the same way a CD is played. For details, refer to вЂњFast-forwarding and fast-reversingвЂќ. NOTE When connecting iPodВ®: - When the end of an index is ...