Jeep Liberty: Traction Grades - Department Of Transportation Uniform Tire Quality Grades - If You Need Consumer Assistance - Jeep Liberty Owner's ManualJeep Liberty: Traction Grades

The Traction grades, from highest to lowest, are AA, A, B, and C. These grades represent the tire’s ability to stop on wet pavement, as measured under controlled conditions on specified government test surfaces of asphalt and concrete. A tire marked C may have poor traction performance.

WARNING!
The traction grade assigned to this tire is based on straight-ahead braking traction tests, and does not include acceleration, cornering, hydroplaning, or peak traction characteristics.

    Treadwear
    The Treadwear grade is a comparative rating, based on the wear rate of the tire when tested under controlled conditions on a specified government test course. For example, a tire graded 150 woul ...

    Temperature Grades
    The temperature grades are A (the highest), B, and C, representing the tire’s resistance to the generation of heat and its ability to dissipate heat, when tested under controlled conditions on ...

    See also:

    To arm the system using remote transmitter
    1. Close all windows and the moonroof (if equipped). 2. Remove the key from the ignition switch. 3. Open the doors and get out of the vehicle. 4. Make sure that the engine hood is locked. ...

    Towing the vehicle with the rear axle raised
    Only possible on vehicles without 4MATIC. When towing your vehicle with the rear axle raised, it is important that you observe the safety instructions (). The ignition must be switched off if y ...

    Emergency stop
    If the seat accidentally begins to move, press one of the buttons to stop the seat. WARNING • Because the driver's seat can be adjusted with the ignition off, children should never be left u ...