Jeep Liberty: Transfer Case Position Indicator Lights
The four-wheel drive indicator lights (4WD, 4 LOW) are located in the instrument cluster. The NEUTRAL indicator light is located on the transfer case switch. If there is no indicator light on or flashing, the transfer case position is two-wheel drive (2WD). If the indicator light is on, the desired position (4WD AUTO, 4WD LOW, or NEUTRAL) has been obtained.
If One Or More Shift Requirements Are Not Met:
вЂў An indicator light will flash.
вЂў The transfer case will not shift.
NOTE: The вЂњSERV 4WD Warning LightвЂќ monitors the electric shift four-wheel drive system. If this light remains on after engine start up, or it illuminates during driving, it means that the four-wheel drive system is not functioning properly and that service is required.
1. Select the top menu (phone menu). 2. Press the OFF hook switch and load the outgoing call history. 3. Select the вЂњDIALвЂќ menu. ...
Roof Luggage Rack вЂ” If Equipped
NOTE: Roof rack and crossbars cannot be used on vehicles equipped with Skyslider . The load carried on the roof, when equipped with a luggage rack, must not exceed 150 lbs (68 kg), and it shoul ...
Rear seat arm rest
This arm rest is located in the center of the rear seat back. ...