Hyundai Tucson: Trip computer
The trip computer is a microcomputer-controlled driver information gauge that displays information related to driving, such as a tripmeter, distance to empty, average fuel consumption average speed, and drive time on the LCD.
The odometer records the total driving distance in kilometers or miles, and is useful for keeping a record for maintenance intervals.
Trip Computer Switch
Pushing in the trip computer switch behind the right side of the steering wheel changes the display as follows;
o This mode indicates the total distance travelled since the last tripmeter reset. Total distance is also reset to zero if the battery is disconnected. o Pressing the trip computer switch for more than 1 second, when the tripmeter is being displayed, clears the tripmeter to zero. o The meter's working range is from 0.0 to 999.9 miles. o You can choose the TRIP A or TRIP B.
2. Distance to Empty
o This mode indicates the estimated distance to empty from the current fuel in the fuel tank and distance to empty symbol. o When refueling with more than 1.6 gallons (6 liters), the trip computer will recognize refueling. o For an accurate distance to empty, drive more than 30 miles. o When the distance to empty is less than 30 miles, the symbol will flash and the distance to empty digits will indicate "---" until more fuel is added.
NOTE: o The distance to empty can differ from the actual tripmeter according to driving conditions. o The distance to empty can vary according to the driving conditions, driving pattern or vehicle speed.
3. Average Fuel Consumption
o This mode calculates the average fuel consumption from the total fuel used and the distance since the last average consumption reset. o The total fuel used is calculated from the fuel consumption input. o For an accurate calculation, drive more than 30 miles. o The meter's working range is from 0.1 to 199.9 MPG.
4. Average Speed
o This mode indicates the average speed since the last tripmeter reset. o Even if the vehicle is not in motion, the average speed keeps going while the engine is running. o The meterвЂ™s working range is from 0 to 999 MPH. o Press the trip computer switch for more than 1 seconds, when the average speed is being displayed, clears the average speed to "---".
5. Drive Time
o This mode indicates the drive time since the last tripmeter reset. o Even if the vehicle is not in motion, the drive time keeps going while the engine is running. o The meterвЂ™s working range is from 0:00 to 99:59. o Press the trip computer switch for more than 1 second, when the drive time is being displayed, clears the drive time to zero.
Leather seat materials
The leather used by SUBARU is a high quality natural product which will retain its distinctive appearance and feel for many years with proper care. Allowing dust or road dirt to build up on the ...
Typical pump octane label Volvo recommends premium fuel for best performance, but using 87 octane or above will not affect engine reliability. Volvo engines are designed to achieve rated hor ...
Programming rolling-code-protected garage door openers in the U.S.A.
If your garage door opener has a rolling code feature, program the HomeLinkВ® Wireless Control System for it by following steps 1 through 5 in вЂњGarage door opener programming in the U.S.A.вЂ ...