Controls - GMC Terrain Owner's Manual" border="0" width="100" align=right style="margin: 0px 3px 0 3px">GMC Terrain: Trip/Fuel Menu Items
Press the MENU button until Trip/ Fuel Information Menu is displayed. Then press to scroll through the following menu items:
○ Trip 1
○ Trip 2
○ Fuel Range
○ Average Fuel Economy
○ Instantaneous Fuel Economy
○ Average Vehicle Speed
○ Digital Speedometer
○ Blank Display
Trip 1 and Trip 2
This display shows the current distance traveled, in either kilometers (km) or miles (mi), since the last reset for the trip odometer. The trip odometer can be reset to zero by pressing SET/CLR while the trip odometer display is showing.
This display shows the approximate distance the vehicle can be driven without refueling. The fuel range estimate is based on an average of the vehicle's fuel economy over recent driving history and the amount of fuel remaining in the fuel tank. Fuel range cannot be reset.
Average Fuel Economy
This display shows the approximate average liters per 100 kilometers (L/100 km) or miles per gallon (mpg). This number is calculated based on the number of L/100 km (mpg) recorded since the last time this menu item was reset. The fuel economy can be reset by pressing SET/CLR while the Average Fuel Economy display is showing. The display may not reset to zero.
Instantaneous Fuel Economy
This display shows the current fuel economy in either liters per 100 kilometers (L/100 km) or miles per gallon (mpg). This number reflects only the fuel economy that the vehicle has right now and changes frequently as driving conditions change. Unlike average economy, this display cannot be reset.
Average Vehicle Speed
This display shows the average speed of the vehicle in kilometers per hour (km/h) or miles per hour (mph). This average is calculated based on the various vehicle speeds recorded since the last reset of this value. The average speed can be reset by pressing SET/CLR while the Average Vehicle Speed display is showing.
This display can be used as a timer. To start the timer, press SET/CLR while Timer is displayed. The display will show the amount of time that has passed since the timer was last reset, not including time the ignition is off. Time will continue to be counted as long as the ignition is on, even if another display is being shown on the DIC. The timer will record up to 99 hours, 59 minutes and 59 seconds (99:59:59) after which the display will return to zero. To stop the timer, press SET/CLR briefly while Timer is displayed. To reset the timer to zero, press and hold SET/CLR.
The speedometer shows how fast the vehicle is moving in either kilometers per hour (km/h) or miles per hour (mph). The speedometer cannot be reset.
This display is used for the OnStar or Navigation System Turn-by-Turn guidance. See OnStar Overview on page 14‑1 or the Navigation manual, if the vehicle has navigation, for more information.
This display shows no information.
Vehicle Information Menu Items
Press the MENU button until Vehicle Information Menu is displayed. Then press to scroll through the following menu items:
○ Tire Pressure
○ Remaining Oil Life
○ Blank Display
Press SET/CLR to enter the unit menu. Then press or to switch between METRIC or US when the Unit display is active. Press SET/ CLR to confirm the setting. This will change the displays on the cluster and DIC to either metric or English (US) measurements.
The display will show a vehicle with the approximate pressures of all four tires. Tire pressure is displayed in either kilopascal (kPa) or in pounds per square inch (psi). See Tire Pressure Monitor System on page 10‑52 and Tire Pressure Monitor Operation on page 10‑54 for more information.
Remaining Oil Life
This display shows an estimate of the oil's remaining useful life. If REMAINING OIL LIFE 99% is displayed, that means 99% of the current oil life remains.
When the remaining oil life is low, the CHANGE ENGINE OIL SOON message will appear on the display. See Engine Oil Messages on page 5‑28. The oil should be changed as soon as possible. See Engine Oil on page 10‑10. In addition to the engine oil life system monitoring the oil life, additional maintenance is recommended in the Maintenance Schedule in this manual. See Maintenance Schedule on page 11‑3 for more information.
Remember, the Oil Life display must be reset after each oil change. It will not reset itself. Also, be careful not to reset the Oil Life display accidentally at any time other than when the oil has just been changed.
It cannot be reset accurately until the next oil change. To reset the engine oil life system, press SET/ CLR while the Oil Life display is active. The display will ask for confirmation of a reset. Press or to select Yes or No. Then press SET/CLR to confirm the selection. See Engine Oil Life System on page 10‑12.
This display shows no information.
The vehicle may have a compass in the Driver Information Center (DIC). See Compass on page 5‑5.
To Select a Station
You can use any of five methods to find radio stations on the selected band: tune, seek, scan, the preset buttons, and auto select. TUNE - Use the TUNE bar to tune the radio to a desired freq ...
Before you begin driving your vehicle, you should know what gasoline to use and how to check the levels of important fluids. You also need to know how to properly store luggage or packages. ...
Extending and retracting the cargo compartment cover
To extend: pull cargo compartment cover 1 back and clip it into the retainers on the left and right. To retract: unhook cargo compartment cover 1 from the retainers on the left and right ...