GMC Terrain: Turn and Lane-Change Signals - Exterior Lighting - Lighting - GMC Terrain Owner's ManualGMC Terrain: Turn and Lane-Change Signals

An arrow on the instrument panel cluster will flash in the direction of the turn

An arrow on the instrument panel cluster will flash in the direction of the turn or lane change.

Move the lever all the way up or down to signal a turn.

Raise or lower the lever until the arrow starts to flash to signal a lane change. Hold it there until the lane change is complete. If the lever is briefly pressed and released, the turn signal flashes three times.

The lever returns to its starting position when it is released.

If after signaling a turn or a lane change the arrows flash rapidly or do not come on, a signal bulb may be burned out.

Have the bulbs replaced. If the bulb is not burned out, check the fuse; see Fuses on page 10‑38 for more information.

    Hazard Warning Flashers
    (Hazard Warning Flasher): Press this button, on the center of the instrument panel, to make the front and rear turn signal lamps flash on and off. This warns others that you are having trouble. ...

    Fog Lamps
    The fog lamps control is located on the turn/lane change lever. Use the fog lamps for better vision in foggy or misty conditions. FOG (Fog Lamps): Turn the fog lamp band on the lever to and re ...

    See also:

    Manual operation
    The manual mode can be used to control the heater and air conditioner to your desired settings. To turn off the heater and air conditioner, turn the fan control dial to the OFF position. Fan s ...

    Periodic inspections
    To keep your vehicle in the best condition at all times, always have the recommended maintenance services listed in the maintenance schedule in the “Warranty and Maintenance Booklet” perfo ...

    Valet
    Selection: Valet mode allows the vehicle to be driven and locked by a parking attendant, without giving access to the luggage compartment. Valet mode also prevents operation of the touch screen, ...