GMC Terrain: Turn Signals When Towing a Trailer - Driving Characteristics and Towing Tips - Towing - Driving and Operating - GMC Terrain Owner's ManualGMC Terrain: Turn Signals When Towing a Trailer

The turn signal indicators on the instrument panel flash whenever signaling a turn or lane change. Properly hooked up, the trailer lamps also flash, telling other drivers the vehicle is turning, changing lanes or stopping.

When towing a trailer, the arrows on the instrument panel flash for turns even if the bulbs on the trailer are burned out. Check occasionally to be sure the trailer bulbs are still working.

    Making Turns
    Notice: Making very sharp turns while trailering could cause the trailer to come in contact with the vehicle. The vehicle could be damaged. Avoid making very sharp turns while trailering. When tu ...

    Driving on Grades
    Reduce speed and shift to a lower gear before starting down a long or steep downgrade. If the transmission is not shifted down, the brakes might have to be used so much that they would get hot and ...

    See also:

    Driver Alert Control (DAC)– introduction
    This function is intended to alert the driver if his/her driving becomes erratic, such as if the driver is distracted or fatigued. NOTE The camera has certain limitations, see page 159. A c ...

    When the following messages are displayed
    If one of the following messages is displayed while connecting the USB storage device/iPodВ®, determine the cause based on the following information. If you cannot clear those messages, please ...

    Registering by voice
    1. Select the “BY VOICE” menu. 2. Press the talk switch . 3. Say the phone number to be registered. 4. Select the “CONFIRM” menu. 5. Select the “RECORD NAME” menu by operating the †...