Ford Escape: Using the right bulbs - Bulb Replacement - Lights - Ford Escape Owner's ManualFord Escape: Using the right bulbs

Replacement bulbs are specified in the chart below. Headlamp bulbs must be marked with an authorized “D.O.T.” for North America and an “E” for Europe to ensure lamp performance, light brightness and pattern and safe visibility. The correct bulbs will not damage the lamp assembly or void the lamp assembly warranty and will provide quality bulb burn time.

Replacing headlamp bulbs

    Lamp assembly condensation
    Exterior lamps are vented to accommodate normal changes in pressure. Condensation can be a natural by-product of this design. When moist air enters the lamp assembly through the vents, there is a ...

    Replacing headlamp bulbs
    1. Make sure the headlamp control is in the off position. 2. Open the hood. 3. Reach over the front bolster. 4. Remove the bulb by turning it counterclockwise and then pulling it straight out. ...

    See also:

    12-volt sockets
    12-volt socket in the front tunnel console 12-volt socket in the rear center console The electrical sockets can be used for 12-volt accessories such as cell phone chargers and coolers. For t ...

    Light control and wiper control levers/switches
    1) Windshield wiper 2) Mist 3) Windshield washer 4) Rear window wiper and washer switch 5) Wiper intermittent time control switch 6) Wiper control lever 7) Light control switch 8) Fo ...

    Shifting
    To move the selector lever, Push the button A while depressing the brake pedal. Push the button. Just move the selector lever. After starting the engine, fully depress the brake pedal, ...